Home > Installation Services
Twin Wall Insulated Chimney System  Fixed Price Installation £3,249.00 - Pay 50%  Deposit now
Twin Wall Insulated Chimney System  Fixed Price Installation £3,249.00 - Pay 50%  Deposit now Twin Wall Insulated Chimney System  Fixed Price Installation £3,249.00 - Pay 50%  Deposit now Twin Wall Insulated Chimney System  Fixed Price Installation £3,249.00 - Pay 50%  Deposit now Twin Wall Insulated Chimney System  Fixed Price Installation £3,249.00 - Pay 50%  Deposit now

Twin Wall Insulated Chimney System Fixed Price Installation £3,249.00 - Pay 50% Deposit now


Our Price: £1,624.99
Description



Fixed Price Twin Wall Insulated Chimney System
 
Installation £3,249.99. (deposit 50% = £1624.99)

If Installation only is required. We will charge 50% of the estimated costs in advance prior to setting a date for installation under an individual contract. The balance due, plus any extras arising during installation, is to be paid in full when installation is complete and before the installer leaves the customer’s premises.

Windsor & Eton Stoves Fixed Price Installation - Twin Wall Insulated Chimney System is designed for installation into a standard two storey dwelling. Where roof pitch does not exceed 30 degrees. The Fixed price service Includes a 12mm glass hearth plate and so assumes a suitable stove is available (Stove not included), that the proposed stove is not defective and that access can be safely achieved using a ladders. Windsor & Eton Stoves fixed price installation should cover 90% of all such installations scenarios. This is intended gives peace of mind and ensures safe, efficient installation with local building control approval included.

Windsor & Eton Stoves fixed price installation is Subject to Site Survey.

Installations components include;
 
  • Site Survey (Survey Inclusive).
  • Standard Insulated Chimney System Cowl (add £80 for Anti Downdraft Cowl)
  • 3 x 1000mm x 150mm diameter Insulated chimney system lengths.
  • 2 x 500mm x 150mm diameter Insulated chimney system lengths.
  • 1 x Adjustable x 150mm diameter Insulated chimney system lengths.
  • 3 x 1 x 150mm diameter Insulated chimney System 45 Degree system elbow.
  • 1 x 150mm diameter Insulated chimney Structural Support
  • 1 x 150mm diameter Insulated chimney System 135 Degree Tee including Soot Cover
  • 1 x 150mm Diameter Insulated Chimney System Wall Sleeve
  • 1 x 150mm diameter Insulated chimney System 200-400mm Adjustable Wall Bracket
  • 1 x 150mm diameter Insulated chimney System Wall Plate white
  • 1 x 150mm diameter Insulated chimney System Wall Plate Stainless Steel
  • 1 x 150mm diameter Insulated chimney System to Single Wall adaptor
  • 1 x Glass Hearth Plate - W1000mm x D1200mm  x H12mm
  • Suitable Adjustable Stove Pipe
  • CO2 Alarm (Legal Requirement)
  • Sundries – All brackets and fitting we use are of decent thickness steel and well designed.
  • Masonry Bolts
  • Fire Cement
  • Mortar
  • Data Plate
  • Advice on the correct choice chimney System will be offered following site survey.
  • Should wider gauge Chimney system be required then Windsor and Eton Stoves Limited reserves the right to re-quote. Should the customer not then wish to proceed a non-refundable £25 Inspection fee will apply to basic on-site visits & estimates.
  • Certification of Compliance (Legal Requirement)
  • Building Regulations / Control Approval. (Legal Requirement)
  • Price Includes VAT
  • Offer Excludes Internal / External Venting
  • Excludes flue liner insulation
  • All of our Insulated Chimney Systems are HETAS approved and satisfy Building Regulations.
  • Stainless Steel finish is provided as standard. For Coloured Insulated Systems please ask for a quotation.

 Typical Installation



Windsor & Eton Stoves fixed price installation offer assumes that suitable Stove is available on the day on Installation, with appropriate, location, and external access; The inclusive survey aims to verify this, ensuring a safe, efficient and legal installation. In most cases the Windsor & Eton Stoves fixed price service will be sufficient.

Windsor & Eton Stoves fixed price installation is subject to our Standard Terms and Conditions.

We always aim to ensure that our prices are reasonable and fair; therefore should any additional work be required we will provide a detailed estimate, outlining the reason(s) for and itemised pricing covering any further materials or work necessary.

Windsor & Eton Stoves are an approved HETAS installer. We ensure the safety, technical standard and compliance with Building Regulations of all work carried out.

If Installation only is required. We will charge 50% of the estimated costs in advance prior to setting a date for installation under an individual contract. The balance due, plus any extras arising during installation, is to be paid in full when installation is complete and before the installer leaves the customer’s premises.

For friendly, professional advice call Windsor & Eton Stoves today on 0800 678 5041 or email support@windsorandetonstoves.co.uk


 

Customer Reviews
Write an online review and share your thoughts with other shoppers!